Features Highlights: Unprecedented ease-of-use through cutting-edge technology. New tuning-less function means no adjustment needed. Impressive load regulation with strengthened vibration suppression function. Slashed setup time. Setup wizard function and wiring conformation function of engineering tool SigmaWin+ allows easy setup just by watching the monitor. High response characteristics at 1 kHz min. New advanced autotuning. Reduced positioning time through model following control, and smooth machine control enabled by vibration supression function.

Read more less

Product Article Number (Market Facing Number) 6SY7000-0AB30 Product Description ***SPARE PART*** Radial fan unit 220 for devices design F Product Lifecycle (PLM) PM490:Start of final year of support

Read more less

Brand Delta Torque 21.48 Newton meter Max Output Power 1.5 K Watt Output Current 8.3 Amp Input Voltage 220 V Input Phase 3 - Phase Model Name/Number ASD-B2-1521-B Connects directly 220V single phase To 3 x 230V

Read more less

Size: 25m Colour: Bend Brand SPABOY Connector Type HDMI Cable Type USB Compatible Devices Tablet Compatible Phone Models Yasukawa servo

Read more less

CV20 Series VFD Kinco Economical mini VFD Output frequency 0-300Hz. V/F Control and configurable V/F curves. Carrier frequency 6kHz. Automatic torque lifting and automatic slip compensation. Built-in Modbus,RS485 baud rate up to 19200bps. Product Information ■ Main Features    • Output frequency 0-300Hz.    • V/F Control and configurable V/F curves.    • Carrier frequency 6kHz.    • Automatic torque lifting and automatic slip compensation.；

Read more less

DM860H Stepper Motor Driver DMA860H | MA860H 7.2 Ampere MICROSTEPPING STEPPER DRIVER Features of DM860 MicroStep Stepper Motor Driver High performance, cost-effective Supply voltage up to 80VAC or +110VDC Output current up to 7.2 Amoere Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current and short-cicuit protection  Specifications of DM860 MicroStep Stepper Motor Driver D860H | MA860H microstepping drive. Input voltage :Up to +80VAC or +110VDC. Output current Up to 7.2A. Pulse input frequency up to 300 KHz. Automatic idle-current reduction. Over-voltage, over-current protection. Suitable for 2-phase and 4-phase motors. Support PUL/DIR and CW/CCW modes. Operating Temperature : 70 C.

Read more less

FA-Servo-Motion: Servo Amplifier Number of Axes 1 Dynamic Break BUILT-IN Series MELSERVO-J4 Type MR-J4 Power Supply (VAC) 1PHASE 230V, 3PHASE 230V Safety Function Type STO (IEC/EN 61800-5-2) Command Interface SSCNETⅢ/H Rated Capacity (kW) 0,1 Product Dimensions & Weight Depth (mm) 135 Weight (kg) 0,8 Width (mm) 40 Height (mm) 168

Read more less

FA-Servo-Motion: Servo Amplifier Number of Axes 1 Dynamic Break BUILT-IN Series MELSERVO-J4 Type MR-J4 Power Supply (VAC) 1PHASE 230V, 3PHASE 230V Safety Function Type STO (IEC/EN 61800-5-2) Command Interface SSCNETⅢ/H Rated Capacity (kW) 0,75 Product Dimensions & Weight Depth (mm) 185 Weight (kg) 1,4 Width (mm) 60 Height (mm) 168 Conformity CE COMPLIANT EAC COMPLIANT UL/cUL COMPLIANT UKCA COMPLIANT

Read more less

Type of Product Variable Frequency Inverter Drive Output Current 16 A IP Rating IP20 Field Bus Communication Type Profibus, Profinet Phase Three Phase Power Rating 7.5 kW Series FR-D700 Drive Type Vector Control

Read more less

Servo Amplifier Series MELSERVO-J4   Type MR-J4   Rated Capacity (kW) 1   Number of Axes 1   Safety Function Type STO (IEC/EN 61800-5-2)   Power Supply (VAC) 3PHASE 230V   Dynamic Break BUILT-IN   Product Dimensions & Weight Width (mm) 60   Height (mm) 168   Depth (mm) 185   Weight (kg) 1,4  

Read more less

Specifications Primary brand Mitsubishi Electric Main function AC servo drive Product series / family name MELSERVO J2S series Sub-range name MR-J2 series Functions AC motion servo drive / amplifierbuilt-in positioning functionsine wave PWM control/current control method Design built-in dynamic brakebuilt-in position functionforced ventilation cooling Supply voltage (AC) 200Vac-230Vac (200V class; 220Vac / 230Vac) Type of network 3-phase input (3P) Rated active power (kW) 2000W / 2kW Protection functions overcurrent shut-offregeneration overvoltage shut-offoverload shut-off (electronic thermal)servo motor overheat protectionencoder fault protectionregeneration fault protectionundervoltage/sudden power outage protectionoverspeed protectionexcessive error protection Communication protocol RS-422RS-485 Digital inputs 1 x digital input (24Vdc; sink/source) (LSP)1 x digital input (24Vdc; sink/source) (LSN)1 x digital input (24Vdc; sink/source) (DOG)1 x digital input (24Vdc; sink/source) (SON)1 x digital input (24Vdc; sink/source) (MD0)1 x digital input (24Vdc; sink/source) (ST1)1 x digital input (24Vdc; sink/source) (ST2)1 x digital input (24Vdc; sink/source) (DI0)1 x digital input (24Vdc; sink/source) (DI1) Digital outputs 1 x digital output (rly. contact type) (ALM)1 x digital output (rly. contact type) (ZP)1 x digital output (rly. contact type) (CPO)1 x digital output (rly. contact type) (MEND)1 x digital output (rly. contact type) (RD) Analog inputs 1 x analog input (0-10Vdc) (TLA)1 x analog input (-10...+10Vdc) (VC) Dimensions H168mm x W90mm x D195mm Net Height (mm) 168 mm Net Width (mm) 90 mm Net Depth (mm) 195 mm Ambient air temperature for operation 0...+55 °C Ambient air temperature for storage -20°C...+65 °C Technical compatibility with HC-SFS seriesHC-LFS series Order code / Manufacturer SKU MR-J2S-200CP

Read more less

Specifications Primary brand Mitsubishi Electric Main function AC servo drive Product series / family name MELSERVO J2S series Sub-range name MR-J2 series Functions AC motion servo drive / amplifierbuilt-in positioning functionsine wave PWM control/current control method Design built-in dynamic brakebuilt-in position functionforced ventilation cooling Supply voltage (AC) 200Vac-230Vac (200V class; 220Vac / 230Vac) Type of network 3-phase input (3P) Rated active power (kW) 2000W / 2kW Protection functions overcurrent shut-offregeneration overvoltage shut-offoverload shut-off (electronic thermal)servo motor overheat protectionencoder fault protectionregeneration fault protectionundervoltage/sudden power outage protectionoverspeed protectionexcessive error protection Communication protocol RS-422RS-485 Digital inputs 1 x digital input (24Vdc; sink/source) (LSP)1 x digital input (24Vdc; sink/source) (LSN)1 x digital input (24Vdc; sink/source) (DOG)1 x digital input (24Vdc; sink/source) (SON)1 x digital input (24Vdc; sink/source) (MD0)1 x digital input (24Vdc; sink/source) (ST1)1 x digital input (24Vdc; sink/source) (ST2)1 x digital input (24Vdc; sink/source) (DI0)1 x digital input (24Vdc; sink/source) (DI1) Digital outputs 1 x digital output (rly. contact type) (ALM)1 x digital output (rly. contact type) (ZP)1 x digital output (rly. contact type) (CPO)1 x digital output (rly. contact type) (MEND)1 x digital output (rly. contact type) (RD) Analog inputs 1 x analog input (0-10Vdc) (TLA)1 x analog input (-10...+10Vdc) (VC) Dimensions H168mm x W90mm x D195mm Net Height (mm) 168 mm Net Width (mm) 90 mm Net Depth (mm) 195 mm Ambient air temperature for operation 0...+55 °C Ambient air temperature for storage -20°C...+65 °C Technical compatibility with HC-SFS seriesHC-LFS series Order code / Manufacturer SKU MR-J2S-200CP

Read more less