Spec Detail Specifications and design of the products are subject to change without notice for the product improvement. Item Specifications Product Number EX-21B Part Number EX-21B Products Name Ultra-compact Photoelectric Sensor Product details Thru-beam[Front sensing] The price of the product Please contact our office Applicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition certification Sensing range 1 m 3.281 ft Sensing object Min. dia. 2.6 mm dia. 0.102 in opaque object (Setting distance between emitter and receiver: 1 m 3.281 ft) Hysteresis - Repeatability(perpendicular to sensing axis) 0.05 mm 0.002 in or less Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less Current consumption Emitter: 10 mA or lessReceiver: 10 mA or less Output NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) Output:Utilization category DC-12 or DC-13 Output:Short-circuit protection Incorporated Response time 0.5 ms or less Operation indicator Orange LED (lights up when the output is ON) (located on the receiver) Stability indicator Green LED (lights up under stable light received condition or stable dark condition), located on the receiver Sensitivity adjuster - Operation mode switch - Protection IP67 (IEC) Ambient temperature -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Emitting element Red LED (modulated) Emitting element:Peak emission wavelength 640 nm 0.025 mil Material Enclosure: Polyethylene terephthalateLens: Polyalylate Cable 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Cable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). Weight Net weight (each emitter and receiver): 20 g approxGross weight: 60 g approx Accessory -

Read more less

Item specifics Condition New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is ... Read moreabout the condition Brand Unbranded Type PLC Model MS-GXL8-4 MPN Does Not Apply Controller Platform PLC-2 Country of Origin China

Read more less

Usage for Industrial Output NPN Sensing Distance 2.5 mm Voltage 12 V Current 15mA Switching Function Normally open (NO) Detectable Object The Panasonic GX-F8A inductive proximity sensor is designed to detect metal objects Material Nickel Coated Brass Dimension 24 mmx8 mmx7.4 mm Availability In Stock

Read more less

Product Number FX-501 Part Number FX-501 Product Digital Fiber Sensor Details Standard type

Read more less

Type Description Select All Category Sensors, Transducers Sensor, Transducer Accessories Manufacturer Panasonic Industrial Automation Sales Series - Packaging Box Part Status Active Accessory Type Cover For Use With/Related Products - Base Product Number OS-EX20

Read more less

Spec Detail Specifications and design of the products are subject to change without notice for the product improvement. Item Specifications Product Number EX-23 Part Number EX-23 Products Name Ultra-compact Photoelectric Sensor Product details Thru-beam[Side sensing] The price of the product Please contact our office Applicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition certification Sensing range 2 m 6.562 ft Sensing object Min. dia. 3 mm dia. 0.118 in opaque object (Setting distance between emitter and receiver: 2 m 6.562 ft) Hysteresis - Repeatability(perpendicular to sensing axis) 0.05 mm 0.002 in or less Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less Current consumption Emitter: 10 mA or lessReceiver: 10 mA or less Output NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) Output:Utilization category DC-12 or DC-13 Output:Short-circuit protection Incorporated Response time 0.5 ms or less Operation indicator Orange LED (lights up when the output is ON) (located on the receiver) Stability indicator Green LED (lights up under stable light received condition or stable dark condition), located on the receiver Sensitivity adjuster Continuously variable adjuster, located on the emitter Operation mode switch Located on the receiver Protection IP67 (IEC) Ambient temperature -25 to +55 degrees -13 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -30 to +70 degrees -22 to +158 degrees Fahrenheit Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Emitting element Red LED (modulated) Emitting element:Peak emission wavelength 650 nm 0.026 mil Material Enclosure: Polyethylene terephthalateLens: Polyalylate Cable 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Cable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable (both emitter and receiver). Weight Net weight (each emitter and receiver): 20 g approxGross weight: 60 g approx Accessory Adjusting screwdriver: 1 pc

Read more less

Spec Detail Specifications and design of the products are subject to change without notice for the product improvement. Item Specifications Product Number CX-491 Part Number CX-491 Products Name Compact Photoelectric Sensor Product details Retroreflective(With polarizing filters) The price of the product Please contact our office Applicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL Recognition Certification Sensing range 3 m 9.843 ft(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor. Sensing object Ø50 mm Ø1.969 in or more opaque, translucent or specular object(Note) The sensing range and the sensing object of the retroreflective type sensor are specifi ed for the RF-230 reflector. The sensing range represents the actual sensing range of the sensor.(Note) Make sure to confirm detection with an actual sensor before use. Hysteresis - Repeatability(perpendicular to sensing axis) 0.5 mm 0.020 in or less Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less Current consumption 13 mA or less Output NPN open-collector transistor- Maximum sink current: 100 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current) Output:Output operation Switchable either Light-ON or Dark-ON Output:Short-circuit protection Incorporated Response time 1 ms or less Operation indicator Orange LED(lights up when the output is ON)(incorporated on the receiver for thru-beam type) Stability indicator Green LED(lights up under stable light received condition or stable dark condition)(incorporated on the receiver for thru-beam type) Power indicator - Sensitivity adjuster Continuously variable adjuster(incorporated on the receiver for thru-beam type) Automatic interference prevention function Incorporated(Two units of sensors can be mounted close together.) Protection IP67 (IEC) Ambient temperature - 25 to +55℃ -13 to +131℃ ℉ (No dew condensation or icing allowed ), Storage: -30 to +70℃ -22 to +158℃ ℉ Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 500 Hz frequency, 1.5 mm 0.059 in amplitude (10 G max.) in X, Y and Z directions for two hours each Shock resistance 500 m/s2acceleration (50 G approx.) in X, Y and Z directions three times each Emitting element (modulated) Red LED Emitting element (modulated):Peak emission wavelength 680 nm 0.027 mil Material Enclosure: PBT (polybutylene terephthalate)Lens: acrylicIndicator cover: acrylic Cable 0.2 mm23-core cabtyre cable, 2 m 6.562 ft long Cable extension Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable. Weight Net weight: 50 g approx.Gross weight: 80 g approx. Accessory RF-230 (Reflector): 1 pc.

Read more less

Brand LEDURE Light Type LED Special Feature Energy Efficient Wattage 20 Watts Bulb Shape Size BR25 Bulb Base E27 Light Colour Tiranga Voltage 100 Volts (AC) Net Quantity 1.00 Count Number of Items 1 See more About this item With solid construction materials and skilled design ensure constant performance and longevity It offers significant cost savings, slashing electricity bills by up to 80% compared to traditional tube lights and LED battens. Easy to handle and install with its lightweight design Enjoy 1 year of worry free illumination with our led light, backed by our warranty from the date of your invoice.

Read more less

Usage/Application Home Lighting Type LED Shape Round Depth 83 mm Cut-Out Size 145 mm Voltage 240 V Brand Philips IP Rating IP20 Lighting Color Warm White Wattage 9 W Availability In Stock Philips has registered the design for this unique and revolutionary product. The original Ceiling Secure product is available exclusively from Philips The first time installation of Ceiling Secure is exactly like any other panel: an electrician will connect the fixture. Installation is incredibly easy. However, if the light stops working or you want to change it (new rim colour or light colour), simply unscrew the cartridge and install another one from the market. No electrician required! Features: Consistent Bright Light: Up to 80 lumens per watt with no dark spots Easy to Install & Replace: It can be easily installed and replaced with twist and fit mechanism Zero Ceiling Damage: With CeilingSecure, any replacement can be done by simply changing the Panel light, without removing the housing, and without damaging the false ceiling. Hence with this product, false ceilings are secured from damage; thus the name, CeilingSecure

Read more less

Brand TechSupreme Connector Type 2-Pin Compatible Devices Cellular Phones, MP3 Players, Printers Included Components 4 Power Adaptor Special Feature Short Circuit Protection Colour Black Input Voltage 240 Volts (AC) Wattage 12 Watts Number of Items 4 Output Current 2 Amps

Read more less

Flexible Burner Pigtails made of rubber hose are used in LPG (liquefied petroleum gas) and natural gas pipelines for specific applications where flexibility and ease of installation are important.

Read more less

Model Name/Number BPC-1 Usage/Application Gas Burner Material Copper Plus Brass Type Straight Copper Pipe Place Of Origin Pan India Brand Sarna Length 1 Feet Copper brass burner pigtails are the copper pipes with brass bullnose connectors to connect high pressure gas burner with the pressure reducing valve.These come in various sizes and can also be customised as per customer need and requirement if ordered in bulk quantities.Copper Brass Burner pigtail are affixed with Brass bull nose of 3/8 size which is as per BSPTM standards.

Read more less