This Acti9 iCT is a modular contactor. It is a 4P remote control device with 4 normally open contacts. The In rated current is 16A for AC-7a and 6A for AC-7b. The Ue rated operational voltage is 400VAC. The Uc control voltage is 220VAC to 240VAC. This device could be used for control circuits. This device could be used for remote switching lighting loads, small motors (fans, mixers) or HVAC system applications. It is compatible with all the Acti9 control auxiliaries, for lighting, heating & ventilation control applications. This product is compliant with IEC/EN 61095. Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B The maximum switching operations is 6 per minute. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 4kV. Pollution degree is 2. It is DIN rail mountable. Its width is 4 pitches of 9mm. The product color is white (RAL9003). The dimensions are (W) 81mm x (H) 36mm x (D) 68.5mm. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is from -5°C to 60 °C. The storage temperature is from -40°C to 70°C.   This Acti9 iCT is a modular contactor. It is a 4P remote control device with 4 normally open contacts. The In rated current is 16A for AC-7a and 6A for AC-7b. The Ue rated operational voltage is 400VAC. The Uc control voltage is 220VAC to 240VAC. This device could be used for control circuits. This device could be used for remote switching lighting loads, small motors (fans, mixers) or HVAC system applications. It is compatible with all the Acti9 control auxiliaries, for lighting, heating & ventilation control applications. This product is compliant with IEC/EN 61095. Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B The maximum switching operations is 6 per minute. The Ui rated insulation voltage is 500VAC. The Uimp rated impulse withstand voltage is 4kV. Pollution degree is 2. It is DIN rail mountable. Its width is 4 pitches of 9mm. The product color is white (RAL9003). The dimensions are (W) 81mm x (H) 36mm x (D) 68.5mm. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is from -5°C to 60 °C. The storage temperature is from -40°C to 70°C.

Read more less

Number of Batteries 2 D batteries required. (included) Brand Duracell Battery Cell Composition Alkaline Battery Capacity 9 Volts Recommended Uses For Product High intensity flashlight, high powered toys, electric door locks, CO detectors and many more. Net Quantity 2 Count Voltage 1.5 Volts Reusability Single Use Model Name D Battery Weight 281 Grams

Read more less

Colour Green Brand Bosch Material Chrome Vanadium Steel Item Length 23.9 Centimetres Item Weight 1.14 Kilograms About this item Universal Application: This versatile 8-piece wrench set features both open-ended and ring ratchet wrenches, allowing you to tackle a wide variety of tasks. Whether you're working on automotive repairs, plumbing, or general maintenance, this set has you covered. Powerful Torque: The ring ratchet wrenches are designed with a robust 72-tooth mechanism, providing powerful torque and making it easy to handle stubborn fasteners. This feature ensures efficient operation and reliability during use, even in tight spaces. High-Quality Construction: Crafted from premium chrome vanadium steel, these wrenches are not only durable but also rust-resistant. This high-quality material ensures long-lasting performance, making them a reliable choice for both professionals and DIY enthusiasts. Matt Chrome Plated Finish: The wrenches feature a matt chrome plated surface that enhances corrosion resistance and provides a sleek appearance. This finish not only improves durability but also reduces friction, ensuring smooth operation during use. Colour-Coded Size Indication: With a colour-coded size indication system, finding the right wrench for the job is quick and easy. This thoughtful design enhances visibility, allowing for fast selection and minimizing downtime on your projects. Compact Carry Case: The set comes with a compact carry case, making it easy to transport and store the wrenches. The case keeps everything organized, ensuring you can take your tools wherever you need them without the hassle of searching for the right size. Ergonomic Design: Each wrench is ergonomically designed to provide a comfortable grip, allowing for improved control and reduced hand fatigue. This design ensures that you can work for longer periods without discomfort, enhancing productivity.

Read more less

ated power supply voltage 100 to 240 VAC 50/60 Hz100 to 125 VDC Ripple 20% max. (If power supply incorporates a single-phase full-wave rectifier) Allowable voltage variable range 85% to 110% of rated voltage Power consumption Relay ON: Approx. 2 VA (at 240 VAC 60 Hz)/Relay OFF: Approx. 1.3 VA (at 240 VAC 60 Hz)Relay ON: Approx. 1.6 W (at 240 VAC 60 Hz)/Relay OFF: Approx. 1.1 W (at 240 VAC 60 Hz) Reset voltage 10% max. of rated supply voltage Number of time ranges 18 Operation mode ON delay, Flicker OFF start, Flicker ON start, Interval, One shot output Control output (Type) Time-limit: DPDT Control output (Contact output) Resistive load: 250 VAC 5 A (cosφ=1)/5 A at 30 VDC/0.15 A at 125 VDCInductive load (Reference value): 2 A at 250 VAC (cosφ=0.4)/3 A at 30 VDC (L/R=7 ms)Minimum applicable load: 10 mA at 5 VDC (failure level: P Reference value) Operating resetting Time-limit operation/Self-reset Ambient temperature range Operating: -10 to 55 ℃ (with no icing)Storage: -25 to 65 ℃ (with no icing) Ambient humidity range Operating: 35 to 85 % Accuracy of operating time ±0.2% FS max.±0.2% ±10 ms in a range of 1.2 s and 3 s Setting error ±5% FS ±50 ms max. Reset time 0.1 s max. Influence of voltage ±0.2% FS max.±0.2% ±10 ms in a range of 1.2 s and 3 s Influence of temperature ±1% FS max. (±1% ±10 ms in a range of 1.2 s and 3 s) Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength Between current carrying metal parts and non-current carrying metal parts: 2,000 VAC 50/60 Hz 1 minBetween control output terminals and operating circuit: 2,000 VAC 50/60 Hz 1 minBetween contacts of different polarity: 2,000 VAC 50/60 Hz 1 minBetween non-continuous contacts: 1,000 VAC 50/60 Hz 1 min Impulse withstand voltage Between power terminals: 5 kVBetween current carrying terminals and exposed non-current carrying metal parts: 5 kV Noise immunity ±1.5 kV (between power terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise) Static immunity Mulfunction: 8 kV, Destruction: 15 kV Vibration resistance Destruction: 10 to 55 Hz, 0.75 mm single amplitude each in 3 directions for 2 hMalfunction: 10 to 55 Hz, 0.5 mm single amplitude each in 3 directions for 10 min Shock resistance Destruction: 1,000 m/s2, 3 times each in 6 directionsMalfunction: 100 m/s2, 3 times each in 6 directions Life expectancy (relay output) Electrical: 100,000 operations min. (5 A at 250 VAC, resistive load at 1800 operations/h)Mechanical: 20 million operations min. (under no load at 1,800 operations/h) Degree of protection Panel surface: IP40Terminals: IP00 Connecting method 8-pin round socket Case color Munsell 5Y7/1 Weight Approx. 90 g Accessories Instruction manual, Compliance information sheet Applicable socket P2CF-08/ P2CF-08-E/ PF085A/ P3G-08/ PL08/ PL08-Q/ PLE08-0

Read more less

Rated power supply voltage 24 VDC If power supply incorporates a single-phase full-wave rectifier. Allowable voltage variable range 85 to 110% of the power supply voltage Power consumption Relay ON: Approx. 1.1 W (at 24 VDC)/Relay OFF: Approx. 0.1 W (at 24 VDC) Reset voltage 10% max. of rated supply voltage Number of time ranges 4 Operation mode ON delay, Interval, Flicker OFF start, Flicker ON start Control output (Type) Time-limit: DPDT Control output (Contact output) Resistive load: 250 VAC 5 A (cosφ=1)Minimum applicable load: 1 mA at 5 VDC (failure level: P) Ambient temperature range Operating: -10 to 50 ℃ (with no icing)Storage: -25 to 65 ℃ (with no icing) Ambient humidity range Operating: 35 to 85 % Accuracy of operating time ±1% FS max. (±1% ±10 ms in a range of 1 s) Setting error ±10% FS ±50 ms max. Reset time 0.1 s max. (including halfway reset) Influence of voltage ±2% FS max. Influence of temperature ±2% FS max. Insulation resistance 100 MΩ min. (at 500 VDC) Dielectric strength Between current carrying terminals and exposed non-current carrying metal parts: 2000 VAC 50/60 Hz 1 min (Terminal screw sections are not excluded)Between operating power circuit and control output: 2,000 VAC 50/60 Hz 1 minBetween contacts of different polarity: 2,000 VAC 50/60 Hz 1 minBetween non-continuous contacts: 1,000 VAC 50/60 Hz 1 min Impulse withstand voltage Between power terminals: 1 kVBetween current carrying terminals and exposed non-current carrying metal parts: 1.5 kV Noise immunity ±1.5 kV square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise) Static immunity Mulfunction: 4 kV, Destruction: 8 kV Vibration resistance Destruction: 10 to 55 Hz, 0.75 mm single amplitude each in 3 directions for 1 hourMalfunction: 10 to 55 Hz, 0.5 mm single amplitude each in 3 directions for 10 min Shock resistance Destruction: 1,000 m/s2, 3 times each in 6 directionsMalfunction: 100 m/s2, 3 times each in 6 directions Life expectancy (relay output) Electrical: 500,000 operations min. (5 A at 250 VAC, resistive load at 1,800 operations/h, Room temperature)Mechanical: 10 million operations min. (under no load at 1,800 operations/h) Degree of protection IP40 Connecting method 8-pin round socket Case color Beige Weight Approx. 50 g Applicable socket PYFZ-08/ PYFZ-08-E/ PYF08M/ PY08/ PY08-02

Read more less

NMB 4710KL-04W-B30-B00 12V 0.36A 3.36W 2wires Cooling Fan Data Sheet NMB 4710KL-04W-B30-B00 12V 0.36A 2wires Cooling Manufacturer NMB Part number 4710KL-04W-B30-B00 other name 11925KA-12L-AA-00,4710KL04WB30B00,4710KL04WB30B00-ND,471OKL-O4W-B3O-BOO AC/DC DC Fans Fan Type Axial Size 119 mm x 119 mm x 25 mm Voltage 12V Current 0.36A PoWer 3.36W Termination 2 wires Speed (RPM) 2200 Air Flow 88.2 CFM (2.50 m³/min) Bearing Ball Shape Square Series 4710KL Static Pressure 0.129 in H2O (32.1 Pa) Noise 35 dBA Blade_material Plastic Frame_material Plastic Other Name 47L0KL-04W-B30-B00

Read more less

Brand Litost Colour RED Material Polycarbonate Style Modern Light fixture form Recessed Room Type factory, office Product Dimensions 17.5L x 10W x 10H Centimeters Specific Uses For Product Home Indoor/Outdoor Usage Outdoor Power Source AC/DC See less About this item ✅ Revolving / Warning Light With Sound Alarm Buzzer Siren AC 220Volt and DC 12 Volt and DC 24Volt ( RED) ✅ PRODUCTS : MAKE IN INDIA. . High Brightness 14MIL 3528LED . Buzzer Volume : 110DB . Installation : Circular Chassis . Material : Lamp Holder-ABS, Lamp Shade-PC . Protection Degree : IP44 . Multi Voltage : 12VDC, 24VDC, 220VAC . Multi- function : Steady, Strobe, Revolving, flashing, . Wiring -Diagram : (1) BLACK WIRE - COMMON, (2) RED WIRE - 220 VOLT AC. (3) GREEN WIRE - 24 VOLT DC, (4) YELLOW WIRE - 12 VOLT DC ✅ Direct mount, highly efficient, dust proof. Widely used in industrial Lighting Residential Area, Office Building Factory, Traffic Corner, School, Bank. ✅ Total 4 wires are given where 1 is common wire and other 3 Wire for the different current supplies. Warranty not applicable for this product ( MODEL NO : TOWER-A11 )

Read more less

Specifications General Brand AS TOOL CENTER Model Number Non-Contact Detector, AC Voltage Tester Pen, 12-1000V/48-1000V Measurement Range 12-1000V Type Digital Body Material PLASTIC Model Name Non-Contact Detector, AC Voltage Tester Pen, 12-1000V/48-1000V Dimensions Width 50 mm Height 100 mm Depth 7 mm Weight 0.4 g

Read more less

Brand Litost Colour RED Material Polycarbonate Style Modern Light fixture form Recessed Room Type factory, office Product Dimensions 17.5L x 10W x 10H Centimeters Specific Uses For Product Home Indoor/Outdoor Usage Outdoor Power Source AC/DC See less About this item ✅ Revolving / Warning Light With Sound Alarm Buzzer Siren AC 220Volt and DC 12 Volt and DC 24Volt ( RED) ✅ PRODUCTS : MAKE IN INDIA. . High Brightness 14MIL 3528LED . Buzzer Volume : 110DB . Installation : Circular Chassis . Material : Lamp Holder-ABS, Lamp Shade-PC . Protection Degree : IP44 . Multi Voltage : 12VDC, 24VDC, 220VAC . Multi- function : Steady, Strobe, Revolving, flashing, . Wiring -Diagram : (1) BLACK WIRE - COMMON, (2) RED WIRE - 220 VOLT AC. (3) GREEN WIRE - 24 VOLT DC, (4) YELLOW WIRE - 12 VOLT DC ✅ Direct mount, highly efficient, dust proof. Widely used in industrial Lighting Residential Area, Office Building Factory, Traffic Corner, School, Bank. ✅ Total 4 wires are given where 1 is common wire and other 3 Wire for the different current supplies. Warranty not applicable for this product ( MODEL NO : TOWER-A11 )

Read more less

specifications description Series UNF (WTJ_) Material HSS Type of Product Straight Flute Hand Tap Size (mm) 9.53 mm Size 3/8 Inch Part No 1038166A Standard BS949 (Part 1)-1992 Application Steel, Stainless Steel, Forged Steel, Titanium & Nickel Alloy, Aluminium Country of Origin India Tap Type Straight Flute Name of Manufacturer/Packer/Importer Dormer Tools India Pvt Ltd

Read more less

Brand Miranda Warranty No Warranty Size BSW 1/4'' Availability In Stock Matching up with the ever increasing requirements of the customers, our company is engaged in providing HSS Taps.

Read more less