MODEL- CAM POSITIONER MODEL-H8PS-8A

Description

Ratings

 

Item H8PS-[]B H8PS-[]BF H8PS-[]BP H8PS-[]BFP
Rated supply voltage 24 VDC
Operating voltage range 85% to 110% of rated supply voltage
Mounting method Flush mounting Surface mounting,
track mounting		 Flush mounting Surface mounting,
track mounting
Power consumption Approx. 4.5 W at 26.4 VDC for 8-output models
Approx. 6.0 W at 26.4 VDC for 16-/32-output models
Inputs Encoder input Connections to a dedicated absolute encoder
External
inputs		 Input signals 8-output Models: None
16-/32-output Models: Bank inputs 1/2/4, origin input, start input
Input type No voltage inputs: ON impedance:1 kΩ max. (Leakage current: approx. 2 mA at 0 Ω)
ON residual voltage: 2 V max., OFF impedance: 100 kΩ min., Applied voltage: 30
VDC max.
Minimum input signal width: 20 ms
Outputs Cam outputs
RUN output		 NPN open-collector transistor outputs
30 VDC max.,
100 mA max. (Do not exceed 1.6 A total
for all cam outputs and the RUN output.),
residual voltage: 2 VDC max.		 PNP open-collector transistor outputs
30 VDC max. (26.4 VDC for 16-/32-
output Models),
100 mA max. (Do not exceed 1.6 A total
for all cam outputs and the RUN output.),
residual voltage: 2 VDC max.
Pulse output NPN open-collector transistor output
30 VDC max.,
30 mA max.,
residual voltage: 0.5 VDC max.		 PNP open-collector transistor output
30 VDC max. (26.4 VDC for 16-/32-
output Models)
30 mA max.,
residual voltage: 2 VDC max.
Number of outputs 8-output Models: 8 cam outputs, 1 RUN output, 1 pulse output
16-output Models: 16 cam outputs, 1 RUN output, 1 pulse output
32-output Models: 32 cam outputs, 1 RUN output, 1 pulse output
Number of banks 8 banks (for 16-/32-output Models only)
Display method 7-segment, negative transmissive LCD (Main Display: 11 mm (red), Sub-display:
5.5 mm (green))
Memory backup method EEPROM (overwrites: 100000 times min.) that can store data for 10 years min.
Ambient operating temperature -10 to 55°C (with no icing or condensation)
Storage temperature -25 to 65°C (with no icing or condensation)
Ambient humidity 25% to 85%
Degree of protection Panel surface: IP40, Rear case: IP20
Case color Light gray (Munsell 5Y7/1)

 

Characteristics

 

Setting unit 0.5° increments at a resolution of 720, 1° increments at a resolution of 256 or 360 *1
Number of steps Up to 10 steps can be set for each cam to turn the output ON/OFF 10 times. *2
Inputs Encoder input Connections to a dedicated absolute encoder
Response rotation speed (in Run/Test Mode)
1600 r/min max. at a resolution of 256 or 360 (1200 r/min max. if ADV function is set for
4 or more cams) *3 *4
800 r/min max. at a resolution of 720 (600 r/min max. if ADV function is set for 4 or
more cams)
Includes error data detection
Encoder cable extension
distance		 256/360 resolution
100 m max. at 330 r/min or less
52 m max. at 331 to 1200 r/min (331 to 900 r/min if ADV function is set for 4 or more
cams)
12 m max. at 1201 to 1600 r/min (901 to 1200 r/min if ADV function is set for 4 or more
cams)
720 resolution
100 m max. at 330 r/min or less
52 m max. at 331 to 600 r/min (331 to 450 r/min if ADV function is set for 4 or more
cams)
12 m max. at 601 to 800 r/min (451 to 600 r/min if ADV function is set for 4 or more
cams)
Output response time 0.3 ms max.
Insulation resistance 100 MΩ min. (at 500 VDC) between current-carrying terminals and exposed non-
current-carrying metal parts, between all current-carrying parts and the USB connector
Dielectric strength 1000 VAC, 50/60 Hz for 1 min between current-carrying terminals and exposed non-
current-carrying metal parts
500 VAC, 50/60 Hz for 1 min between current-carrying section and USB connector, and
between current-carrying terminals and non-current-carrying metal part of output
connector
Impulse withstand voltage 1 kV between power terminals
1.5 kV between current-carrying terminals and exposed non-current-carrying metal parts
Noise immunity ±480 V between power terminals, ±600 V between input terminals
Square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
Static immunity 8 kV (malfunction), 15 kV (destruction)
Vibration
resistance		 Destruction 10 to 55 Hz with 0.75-mm single amplitude each in 3 directions for 2 hours each
Malfunction 10 to 55 Hz with 0.5-mm single amplitude each in 3 directions for 10 minutes each
Shock
resistance		 Destruction 300 m/s2 3 times each in 6 directions
Malfunction 200 m/s2 3 times each in 6 directions
Approved safety standards cULus (Listing): UL508/CSA C22.2 No. 14
EMC (EMI) EN61326
Emission Enclosure: EN55011 Group1 Class A
(EMS) EN61326
Immunity ESD: EN61000-4-2: 4 kV contact discharge, 8 kV air discharge
Immunity RF-interference: EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1
GHz), 10 V/m (Pulse-modulated, 900 MHz ±5 MHz)
Immunity Conducted Disturbance EN61000-4-6: 10 V (0.15 to 80 MHz)
Immunity Burst: EN61000-4-4: 2 kV for power-line, 1 kV for I/O signal-line
Immunity Surge: EN61000-4-5: 1 kV line to line (power line), 2 kV line to ground (power
line)
Weight Approx. 300 g (Cam Positioner main unit only)

MODEL- CAM POSITIONER MODEL-H8PS-8A

Product form

Ratings   Item H8PS-[]B H8PS-[]BF H8PS-[]BP H8PS-[]BFP Rated supply voltage 24 VDC Operating voltage range 85% to 110% of rated... Read more

Rs. 28,544.20 Excl. VAT

    Description

    Ratings

     

    Item H8PS-[]B H8PS-[]BF H8PS-[]BP H8PS-[]BFP
    Rated supply voltage 24 VDC
    Operating voltage range 85% to 110% of rated supply voltage
    Mounting method Flush mounting Surface mounting,
    track mounting    		 Flush mounting Surface mounting,
    track mounting
    Power consumption Approx. 4.5 W at 26.4 VDC for 8-output models
    Approx. 6.0 W at 26.4 VDC for 16-/32-output models
    Inputs Encoder input Connections to a dedicated absolute encoder
    External
    inputs    		 Input signals 8-output Models: None
    16-/32-output Models: Bank inputs 1/2/4, origin input, start input
    Input type No voltage inputs: ON impedance:1 kΩ max. (Leakage current: approx. 2 mA at 0 Ω)
    ON residual voltage: 2 V max., OFF impedance: 100 kΩ min., Applied voltage: 30
    VDC max.
    Minimum input signal width: 20 ms
    Outputs Cam outputs
    RUN output    		 NPN open-collector transistor outputs
    30 VDC max.,
    100 mA max. (Do not exceed 1.6 A total
    for all cam outputs and the RUN output.),
    residual voltage: 2 VDC max.    		 PNP open-collector transistor outputs
    30 VDC max. (26.4 VDC for 16-/32-
    output Models),
    100 mA max. (Do not exceed 1.6 A total
    for all cam outputs and the RUN output.),
    residual voltage: 2 VDC max.
    Pulse output NPN open-collector transistor output
    30 VDC max.,
    30 mA max.,
    residual voltage: 0.5 VDC max.    		 PNP open-collector transistor output
    30 VDC max. (26.4 VDC for 16-/32-
    output Models)
    30 mA max.,
    residual voltage: 2 VDC max.
    Number of outputs 8-output Models: 8 cam outputs, 1 RUN output, 1 pulse output
    16-output Models: 16 cam outputs, 1 RUN output, 1 pulse output
    32-output Models: 32 cam outputs, 1 RUN output, 1 pulse output
    Number of banks 8 banks (for 16-/32-output Models only)
    Display method 7-segment, negative transmissive LCD (Main Display: 11 mm (red), Sub-display:
    5.5 mm (green))
    Memory backup method EEPROM (overwrites: 100000 times min.) that can store data for 10 years min.
    Ambient operating temperature -10 to 55°C (with no icing or condensation)
    Storage temperature -25 to 65°C (with no icing or condensation)
    Ambient humidity 25% to 85%
    Degree of protection Panel surface: IP40, Rear case: IP20
    Case color Light gray (Munsell 5Y7/1)

     

    Characteristics

     

    Setting unit 0.5° increments at a resolution of 720, 1° increments at a resolution of 256 or 360 *1
    Number of steps Up to 10 steps can be set for each cam to turn the output ON/OFF 10 times. *2
    Inputs Encoder input Connections to a dedicated absolute encoder
    Response rotation speed (in Run/Test Mode)
    1600 r/min max. at a resolution of 256 or 360 (1200 r/min max. if ADV function is set for
    4 or more cams) *3 *4
    800 r/min max. at a resolution of 720 (600 r/min max. if ADV function is set for 4 or
    more cams)
    Includes error data detection
    Encoder cable extension
    distance    		 256/360 resolution
    100 m max. at 330 r/min or less
    52 m max. at 331 to 1200 r/min (331 to 900 r/min if ADV function is set for 4 or more
    cams)
    12 m max. at 1201 to 1600 r/min (901 to 1200 r/min if ADV function is set for 4 or more
    cams)
    720 resolution
    100 m max. at 330 r/min or less
    52 m max. at 331 to 600 r/min (331 to 450 r/min if ADV function is set for 4 or more
    cams)
    12 m max. at 601 to 800 r/min (451 to 600 r/min if ADV function is set for 4 or more
    cams)
    Output response time 0.3 ms max.
    Insulation resistance 100 MΩ min. (at 500 VDC) between current-carrying terminals and exposed non-
    current-carrying metal parts, between all current-carrying parts and the USB connector
    Dielectric strength 1000 VAC, 50/60 Hz for 1 min between current-carrying terminals and exposed non-
    current-carrying metal parts
    500 VAC, 50/60 Hz for 1 min between current-carrying section and USB connector, and
    between current-carrying terminals and non-current-carrying metal part of output
    connector
    Impulse withstand voltage 1 kV between power terminals
    1.5 kV between current-carrying terminals and exposed non-current-carrying metal parts
    Noise immunity ±480 V between power terminals, ±600 V between input terminals
    Square-wave noise by noise simulator (pulse width: 100 ns/1 μs, 1-ns rise)
    Static immunity 8 kV (malfunction), 15 kV (destruction)
    Vibration
    resistance    		 Destruction 10 to 55 Hz with 0.75-mm single amplitude each in 3 directions for 2 hours each
    Malfunction 10 to 55 Hz with 0.5-mm single amplitude each in 3 directions for 10 minutes each
    Shock
    resistance    		 Destruction 300 m/s2 3 times each in 6 directions
    Malfunction 200 m/s2 3 times each in 6 directions
    Approved safety standards cULus (Listing): UL508/CSA C22.2 No. 14
    EMC (EMI) EN61326
    Emission Enclosure: EN55011 Group1 Class A
    (EMS) EN61326
    Immunity ESD: EN61000-4-2: 4 kV contact discharge, 8 kV air discharge
    Immunity RF-interference: EN61000-4-3: 10 V/m (Amplitude-modulated, 80 MHz to 1
    GHz), 10 V/m (Pulse-modulated, 900 MHz ±5 MHz)
    Immunity Conducted Disturbance EN61000-4-6: 10 V (0.15 to 80 MHz)
    Immunity Burst: EN61000-4-4: 2 kV for power-line, 1 kV for I/O signal-line
    Immunity Surge: EN61000-4-5: 1 kV line to line (power line), 2 kV line to ground (power
    line)
    Weight Approx. 300 g (Cam Positioner main unit only)

    Recently viewed products

      © 2026 Industry Baba, Powered by Shopify

          Login

          Forgot your password?

          Don't have an account yet?
          Create account