MODEL-FLOW SWITCH WFD-60 PIPE SIZE 6 INCH

Description

Description

System Sensor WFD 60 Water Flow Detector – 6 Inch shall be installed on system piping as designated on the drawing and/or as specified herein. Detectors shall mount on any clear pipe span of the appropriate nominal size, either a vertical upflow or horizontal run, at least 6˝ from any fittings that may change water direction, flow rate, or pipe diameter or no closer than 24˝ from a valve or drain. Detectors shall have a sensitivity in the range of 4 to 10 gallons per minute and a static pressure rating of 450 psi* for 2˝ – 8˝ pipes. The detector shall respond to water flow in the specified direction after a preset time delay that is field adjustable. The delay mechanism shall be a sealed mechanical pneumatic unit with a visual indication of actuation.

Features

  • 100 percent synchronization activates both alarm panel and local bell
  • Sealed retard mechanism immune to dust and other contaminants
  • Rugged, dual SPDT switches enclosed in a durable terminal block
  • Two-inch mounting hole provided in new WFD30-2 models
  • Field-replaceable retard mechanism and SPDT switches
  • Designed for both indoor and outdoor use
  • UL-listed models are NEMA 4 rated
  • Accommodates up to 12 AWG wire
  • Tamper-resistant cover screws
  • Visual switch activation

Specifications

  • Product: Water Flow Detector
  • Brand: System Sensor
  • Model: WFD 60
  • Pipe Size: 6 "
  • Hole Size: 2"
  • Static Pressure Rating: 450 PSI
  • Maximum Surge: 18 Feet Per Second (FPS)
  • Compatible Pipe: Steel water pipe, schedule 10 through 40
  • Contact Ratings: Two sets of SPDT (Form C) 10.0 A, ½ HP @ 125/250 VAC 2.5 A @ 6/12/24 VDC
  • Warranty: 3 Years



MODEL-FLOW SWITCH WFD-60 PIPE SIZE 6 INCH

Product form

Description System Sensor WFD 60 Water Flow Detector – 6 Inch shall be installed on system piping as designated on... Read more

Rs. 6,844.00 Excl. VAT

    Description

    Description

    System Sensor WFD 60 Water Flow Detector – 6 Inch shall be installed on system piping as designated on the drawing and/or as specified herein. Detectors shall mount on any clear pipe span of the appropriate nominal size, either a vertical upflow or horizontal run, at least 6˝ from any fittings that may change water direction, flow rate, or pipe diameter or no closer than 24˝ from a valve or drain. Detectors shall have a sensitivity in the range of 4 to 10 gallons per minute and a static pressure rating of 450 psi* for 2˝ – 8˝ pipes. The detector shall respond to water flow in the specified direction after a preset time delay that is field adjustable. The delay mechanism shall be a sealed mechanical pneumatic unit with a visual indication of actuation.

    Features

    • 100 percent synchronization activates both alarm panel and local bell
    • Sealed retard mechanism immune to dust and other contaminants
    • Rugged, dual SPDT switches enclosed in a durable terminal block
    • Two-inch mounting hole provided in new WFD30-2 models
    • Field-replaceable retard mechanism and SPDT switches
    • Designed for both indoor and outdoor use
    • UL-listed models are NEMA 4 rated
    • Accommodates up to 12 AWG wire
    • Tamper-resistant cover screws
    • Visual switch activation

    Specifications

    • Product: Water Flow Detector
    • Brand: System Sensor
    • Model: WFD 60
    • Pipe Size: 6 "
    • Hole Size: 2"
    • Static Pressure Rating: 450 PSI
    • Maximum Surge: 18 Feet Per Second (FPS)
    • Compatible Pipe: Steel water pipe, schedule 10 through 40
    • Contact Ratings: Two sets of SPDT (Form C) 10.0 A, ½ HP @ 125/250 VAC 2.5 A @ 6/12/24 VDC
    • Warranty: 3 Years



    Recently viewed products

      © 2026 Industry Baba, Powered by Shopify

          Login

          Forgot your password?

          Don't have an account yet?
          Create account