|
Voltage application method
|
Variable DC
|
|
Applied voltage
|
±8200 V max.
|
|
Ion balance control method
|
Multi-I.C.C
|
|
Ion balance
|
When using SJ-FB01: ±1 V *1*2
When not using SJ-FB01: ±3 V *1*2
|
|
Static elimination time
|
Approx. 0.5 s *3*2
|
|
Installation distance
|
50 mm or more
|
|
Maximum air volume
|
4.8 m3/min
|
|
Ozone density
|
0.005 ppm or less
|
|
Saved data
|
Items
|
Date/time, Ion level, Electrostatic charge level, Air flow, Unit status,
Various threshold values, Ion balance, Temperature, Humidity *4
|
|
Sampling cycle
|
0.1 s
|
|
Data history
|
Data saved every hour
|
|
Event log
|
Saved events: Errors, Warnings, Charge level threshold exceeded, Ion balance threshold
exceeded, Static elimination start/stop, Power ON/OFF, Clean operation
Charge level/ion balance outside threshold/event triggered when: Data stored for
30 seconds before and 30 seconds after an event
|
|
Other functions
|
Auto-clean, Sensor feedback
|
|
Input
|
IN1
|
Static elimination stop input
|
Bidirectional voltage input
Maximum input rating: 26.4 V, ON voltage: 18 V or higher,
OFF current: 0.1 mA or lower, ON current: 3 mA or lower (for 24 V)
|
|
IN2
|
Clean input
|
|
IN3
|
Event trigger input
|
|
Output
|
Output
|
Photo MOS relay output, N.O./N.C. switchable,
Maximum rating: 26.4 V (50 mA), Residual voltage when ON: 1 V or less
|
|
Number of outputs
|
3 (OUT1 to OUT3)
|
|
Functions
|
Assignable functions: Static elimination status, Ion level alarm, Condition alarm, Fan rotation
speed alarm, Charge level threshold exceeded, System error, Other error, Installation error
alarm, Ion balance threshold exceeded, Charged object detection, Feedback sensor error *5
|
|
Ethernet
|
Standard
|
100BASE-TX
|
|
Connector
|
RJ-45 8-pin connector
|
|
Rating
|
Power voltage
|
24 VDC ±10% or dedicated AC adapter (OP-88766)
|
|
Current consumption
|
Normal (including input/output load): 1.6 A or less
Normal (excluding input/output load): 1.45 A or less
ECO mode: 0.18 A (typical) *6
|
|
Environmental resistance
|
Ambient temperature
|
0 to +40°C (0 to +45°C when using OP-88767 or OP-88768)
|
|
Relative humidity
|
35 to 85% RH (no condensation)
|
|
Overvoltage category
|
I
|
|
Pollution degree
|
2
|
|
Material
|
Case: PC / ABS*7, Front ventilation guard: SUS, Rear suction guard: SUS, Louvers: PC / ABS*7,
Display sheet: PC, Operation buttons: PC,
Mounting adapter insulation rubber: Silicone rubber, Bottom insulation rubber: Polyurethane,
Mounting fixture: PBT, Terminal block: LCP, Ethernet connector: Brass (tin plated),
AC adapter connector: PBT, Attached screws: Iron (trivalent chromate)
|
|
Weight
|
Approx. 1.2 kg
|
