|
Model
|
GL-R79F
|
|
Detection capability
|
ø14 mm
|
|
Total length
|
800mm
|
|
No. of beam
|
79
|
|
Detection height
|
780mm
|
|
Protection height
|
804mm
|
|
Beam axis spacing/Lens diameter
|
10 mm / ø4
|
|
Detecting distance
|
0.2 to 10 m*1
|
|
Effective aperture angle
|
Max. ±2.5° (When operating distance is 3 m or more)
|
|
Light source
|
Infrared LED (870 nm)
|
|
Response time (OSSD) (ms)
|
Wire synchronisation, One-line or
Optical synchronisation system (Channel 0)
|
ON→OFF
|
13
|
|
OFF→ON
|
58.2*2
|
|
All blocked→ON
|
88.6*3
|
|
Optical synchronisation system
(Channel A or B)
|
ON→OFF
|
19
|
|
OFF→ON
|
67.4*2
|
|
All blocked→ON
|
113*3
|
|
Detection mode
|
Turns on when no interruptions are present in the detection zone
|
|
Synchronisation between the transmitter and receiver
|
Optical synchronisation or Wire synchronisation (Determined by wiring)
|
|
Light interference prevention function
|
Prevents mutual interference in up to two GL-R systems.
Optical synchronization: prevented by Channel A and B with setting switch
Wire synchronization: prevented automatically
|
|
Control output
(OSSD output)
|
Output
|
2 transistor outputs. (PNP or NPN is determined by the cable type)
|
|
Max. load current
|
500 mA*4
|
|
Residual voltage (during ON)
|
Max. 2.5 V (with a cable length of 5 m)
|
|
OFF state voltage
|
Max. 2.0 V (with a cable length of 5 m)
|
|
Leakage current
|
Max. 200 µA
|
|
Max. capacitive load
|
2.2 µF
|
|
Load wiring resistance
|
Max. 2.5 Ω
|
|
Supplemental output
(Non-safety-related output)
|
AUX
|
transistor outputs. (PNP or NPN is determined by the cable type)
Load current: Max. 50 mA, Residual voltage: Max. 2.5 V (with a cable length of 5 m)
|
|
Error output
|
|
Muting lamp output
|
Incandescent lamp (24 VDC, 1 to 5.5 W)
LED lamp (load current: 10 to 230 mA) can be connected.
|
|
External input
|
When using a PNP output cable
|
EDM input
Wait input
Reset input
Muting input 1, 2
Override input
|
ON voltage: 10 to 30 V
OFF voltage: Open or 0 to 3 V
Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
|
|
When using an NPN output cable
|
ON voltage: 0 to 3 V
OFF voltage: Open or 10 V or more
Up to the power voltage
Short circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
|
|
Power supply
|
Power voltage
|
24 VDC ±20%, ripple (P-P) 10% or less, Class 2
|
|
Current
consumption
(Max.) (mA)
|
Transmitter
|
67
|
|
Receiver
|
80
|
|
Protection circuit
|
Reverse current protection, short-circuit protection for each output, surge protection for each output
|
|
Approved standards
|
EMC
|
EMS
|
IEC61496-1, EN61496-1, UL61496-1
|
|
EMI
|
EN55011 ClassA, FCC Part15B ClassA, ICES-003 ClassA
|
|
Safety
|
IEC61496-1, EN61496-1, UL61496-1 (Type 4 ESPE)
IEC61496-2, EN61496-2, UL61496-2 (Type 4 AOPD)
IEC61508, EN61508 (SIL3), IEC62061, EN62061 (SIL CL3)
EN ISO13849-1:2015 (Category 4, PLe)
UL508
UL1998
|
|
Environmental resistance
|
Enclosure rating
|
IP65/IP67 (IEC60529)
|
|
Overvoltage category
|
II
|
|
Ambient light
|
Incandescent lamp: 3,000 lux or less, Sunlight: 20,000 lux or less
|
|
Operating ambient temperature
|
-10 to +55 °C (No freezing)
|
|
Operating relative humidity
|
15 to 85 % RH (No condensation)
|
|
Storage temperature
|
-25 to +60 °C (No freezing)
|
|
Storage relative humidity
|
15 to 95 % RH
|
|
Vibration resistance
|
10 to 55 Hz, Double amplitude 0.7 mm, 20 sweeps in each of the X, Y, and Z directions
|
|
Shock resistance
|
100 m/s2 (Approx. 10 G), 16 ms pulse, 1,000 times in each of the X, Y, and Z directions
|
|
Material
|
Main unit case
|
Aluminium
|
|
Upper case/lower case
|
Nylon (GF 30%)
|
|
Front cover
|
Polycarbonate, SUS304
|
|
Weight
|
Transmitter
|
1200 g
|
