| ated power supply voltage |
100 to 240 VAC 50/60 Hz
100 to 125 VDC Ripple 20% max. (If power supply incorporates a single-phase full-wave rectifier) |
| Allowable voltage variable range |
85% to 110% of rated voltage |
| Power consumption |
Relay ON: Approx. 2 VA (at 240 VAC 60 Hz)/Relay OFF: Approx. 1.3 VA (at 240 VAC 60 Hz)
Relay ON: Approx. 1.6 W (at 240 VAC 60 Hz)/Relay OFF: Approx. 1.1 W (at 240 VAC 60 Hz) |
| Reset voltage |
10% max. of rated supply voltage |
| Number of time ranges |
18 |
| Operation mode |
ON delay, Flicker OFF start, Flicker ON start, Interval, One shot output |
| Control output (Type) |
Time-limit: DPDT |
| Control output (Contact output) |
Resistive load: 250 VAC 5 A (cosφ=1)/5 A at 30 VDC/0.15 A at 125 VDC
Inductive load (Reference value): 2 A at 250 VAC (cosφ=0.4)/3 A at 30 VDC (L/R=7 ms)
Minimum applicable load: 10 mA at 5 VDC (failure level: P Reference value) |
| Operating resetting |
Time-limit operation/Self-reset |
| Ambient temperature range |
Operating: -10 to 55 ℃ (with no icing)
Storage: -25 to 65 ℃ (with no icing) |
| Ambient humidity range |
Operating: 35 to 85 % |
| Accuracy of operating time |
±0.2% FS max.
±0.2% ±10 ms in a range of 1.2 s and 3 s |
| Setting error |
±5% FS ±50 ms max. |
| Reset time |
0.1 s max. |
| Influence of voltage |
±0.2% FS max.
±0.2% ±10 ms in a range of 1.2 s and 3 s |
| Influence of temperature |
±1% FS max. (±1% ±10 ms in a range of 1.2 s and 3 s) |
| Insulation resistance |
100 MΩ min. (at 500 VDC) |
| Dielectric strength |
Between current carrying metal parts and non-current carrying metal parts: 2,000 VAC 50/60 Hz 1 min
Between control output terminals and operating circuit: 2,000 VAC 50/60 Hz 1 min
Between contacts of different polarity: 2,000 VAC 50/60 Hz 1 min
Between non-continuous contacts: 1,000 VAC 50/60 Hz 1 min |
| Impulse withstand voltage |
Between power terminals: 5 kV
Between current carrying terminals and exposed non-current carrying metal parts: 5 kV |
| Noise immunity |
±1.5 kV (between power terminals), square-wave noise by noise simulator (pulse width: 100 ns/1 µs, 1-ns rise) |
| Static immunity |
Mulfunction: 8 kV, Destruction: 15 kV |
| Vibration resistance |
Destruction: 10 to 55 Hz, 0.75 mm single amplitude each in 3 directions for 2 h
Malfunction: 10 to 55 Hz, 0.5 mm single amplitude each in 3 directions for 10 min |
| Shock resistance |
Destruction: 1,000 m/s2, 3 times each in 6 directions
Malfunction: 100 m/s2, 3 times each in 6 directions |
| Life expectancy (relay output) |
Electrical: 100,000 operations min. (5 A at 250 VAC, resistive load at 1800 operations/h)
Mechanical: 20 million operations min. (under no load at 1,800 operations/h) |
| Degree of protection |
Panel surface: IP40
Terminals: IP00 |
| Connecting method |
8-pin round socket |
| Case color |
Munsell 5Y7/1 |
| Weight |
Approx. 90 g |
| Accessories |
Instruction manual, Compliance information sheet |
| Applicable socket |
P2CF-08/ P2CF-08-E/ PF085A/ P3G-08/ PL08/ PL08-Q/ PLE08-0 |
