Spec Detail Specifications and design of the products are subject to change without notice for the product improvement. Item Specifications Product Number EX-14A Part Number EX-14A Products Name Ultra-slim Photoelectric Sensor Product details Convergent reflective (Diffused beam type) [Front sensing] Applicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL Recognition certification(Note) : Conformed from December 2021 production. Sensing range 2 to 25 mm 0.079 to 0.984 in (Conv. point: 10 mm 0.394 in)(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object. Min. sensing object ø0.1 mm ø0.004 in copper wire (Completely beam interrupted object) (Setting distance: 10 mm 0.394 in) Hysteresis 15 % or less of operation distance(Note) The sensing range and the hysteresis are specified for white non-glossy paper (50 × 50 mm 1.969 × 1.969 in) as the object. Repeatability(perpendicular to sensing axis) 0.1 mm 0.004 in or less Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less Current consumption 13 mA or less Output NPN open-collector transistor- Maximum sink current: 50 mA- Applied voltage: 30 V DC or less (between output and 0 V)- Residual voltage: 2 V or less (at 50 mA sink current),1 V or less (at 16 mA sink current) Output:Utilization category DC-12 or DC-13 Output:Short-circuit protection Incorporated Response time 0.5 ms or less Operation indicator Orange LED (lights up when the output is ON) Incident beam indicator - Stability indicator Green LED (lights up under stable light received condition or stable dark condition) Pollution degree 3 (Industrial environment) Protection IP67 (IEC) Ambient temperature -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +70 ℃ -22 to +158 ℉ Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (20 G max.) in X, Y and Z directions for two hours each Shock resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Emitting element Red LED (Peak emission wavelength: 680 nm 0.027 mil, modulated) Material Enclosure: PolyarylateLens: Polyarylate Cable 0.1 mm2 3-core (emitter: 2-core) cabtyre cable, 2 m 6.562 ft long Cable extension Extension up to total 50 m 164.042 ft is possible with 0.3 mm2, or more, cable.(Note) : For safety applications, do not exceed 30 m 98.425 ft. Weight Net weight: 20 g approxGross weight: 40 g approx Accessory Mounting screws: 1 set

Read more less

  Type Description Select All Category Industrial Automation and Controls Industrial Sensors Proximity Sensors - Industrial Manufacturer Panasonic Industrial Automation Sales Series GX Packaging Box Part Status Active Sensor Type Inductive Sensing Distance 0.13" (3.3mm) Output Type PNP-NO, 3-Wire Response Frequency 500Hz Shielding Unshielded Material - Body Plastic Voltage - Supply 12V ~ 24V Termination Style Cable Leads Operating Temperature -25°C ~ 70°C Ingress Protection IP68 Indicator LED Package / Case Module Base Product Number GX-F12

Read more less

Spec Detail Specifications and design of the products are subject to change without notice for the product improvement. Item Specifications Product Number PM-T45 Part Number PM-T45 Products Name Amplifier Built-in / U-shaped Micro Photoelectric Sensor Product details Compact / Cable type [T type] Applicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL/c-UL Recognition certification(Note) : Conformed from December 2021 production. Sensing range 6 mm 0.236 in (fixed) Minimum sensing object 0.8 × 1.2 mm 0.031 × 0.047 in opaque object Hysteresis 0.05 mm 0.002 in or less Repeatability 0.01 mm 0.0004 in or less Supply voltage 5 to 24 V DC ±10 % Ripple P-P 10 % or less Current consumption 15 mA or less Output NPN open-collector transistor・Maximum sink current: 50 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) Output:Output operation Incorporated with 2 outputs: Light-ON / Dark-ON Output:Short-circuit protection Incorporated Response time Under light received condition: 20 μs or lessUnder light interrupted condition: 80 μs or less(Maximum response frequency: 3 kHz)(Note)(Note) : Refer to the note on the specification page for the response frequency. Operation indicator Orange LED (lights up under light received condition) Pollution degree 3 Protection IP64 (IEC) Ambient temperature -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉ Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated) Material Enclosure: PBTDisplay section: Polycarbonate Cable 0.09-mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long Wiring length Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.(Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.(Note 2) : For safety applications, do not exceed 30 m 98.425 ft. Weight Net weight: 10 g approx.Gross weight: 15 g approx. Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉.

Read more less

Spec Detail Specifications and design of the products are subject to change without notice for the product improvement. Item Specifications Product Number PM-Y45 Part Number PM-Y45 Products Name Amplifier Built-in / U-shaped Micro Photoelectric Sensor Product details Compact / Cable type [Y type] Applicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), ISO 13849-1 (Category 1, PLc) (Note), UL/c-UL Recognition certification(Note) : Conformed from December 2021 production. Sensing range 6 mm 0.236 in (fixed) Minimum sensing object 0.8 × 1.2 mm 0.031 × 0.047 in opaque object Hysteresis 0.05 mm 0.002 in or less Repeatability 0.01 mm 0.0004 in or less Supply voltage 5 to 24 V DC ±10 % Ripple P-P 10 % or less Current consumption 15 mA or less Output NPN open-collector transistor・Maximum sink current: 50 mA・Applied voltage: 30 V DC or less (between output and 0 V)・Residual voltage: 2 V or less (at 50 mA sink current), 1 V or less (at 16 mA sink current) Output:Output operation Incorporated with 2 outputs: Light-ON / Dark-ON Output:Short-circuit protection Incorporated Response time Under light received condition: 20 μs or lessUnder light interrupted condition: 80 μs or less(Maximum response frequency: 3 kHz)(Note)(Note) : Refer to the note on the specification page for the response frequency. Operation indicator Orange LED (lights up under light received condition) Pollution degree 3 Protection IP64 (IEC) Ambient temperature -25 to +55 ℃ -13 to +131 ℉ (No dew condensation or icing allowed), Storage: -30 to +80 ℃ -22 to +176 ℉ Ambient humidity 5 to 85 % RH, Storage: 5 to 95 % RH Ambient illuminance Fluorescent light: 1,000 ℓx at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 2,000 Hz frequency, 1.5 mm 0.059 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each Shock resistance 15,000 m/s2 acceleration (1,500 G approx.) in X, Y and Z directions three times each Emitting element Infrared LED (Peak emission wavelength: 855 nm 0.034 mil, non-modulated) Material Enclosure: PBTDisplay section: Polycarbonate Cable 0.09-mm2 4-core cabtyre cable, PVC, 1 m 3.281 ft long Wiring length Extension up to total 100 m 328.084 ft is possible with 0.3 mm2, or more, cable.(Note 1) : If the cable is extended to 20 m 65.617 ft or longer, confirm that the supply voltage at the end of the cable attached to the sensor is 4.5 V or higher.(Note 2) : For safety applications, do not exceed 30 m 98.425 ft. Weight Net weight: 10 g approx.Gross weight: 15 g approx. Remark Where measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +23 ℃ +73.4 ℉. 

Read more less

Key Benefits at a Glance 2-channel isolated barrier 24 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Reversible mode of operation Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Read more less

Key Benefits at a Glance 2-channel isolated barrier 24 V DC supply (Power Rail) Dry contact or NAMUR inputs Relay contact output Line fault detection (LFD) Housing width 12.5 mm Up to SIL 2 (SC 3) acc. to IEC/EN 61508

Read more less

Key Benefits at a Glance Basic series 0.8 mm flush

Read more less

Key Benefits at a Glance Sensor head bidirectional and rotatable 4 LEDs indicator for 360° visibility 30 mm non-flush 4-wire DC

Read more less

Key Benefits at a Glance Use in harsh environments High shock resistance Extended temperature range-40 ... +85 °C Extended operating voltage range Extremely high switching frequency

Read more less

Condition New – Open box Seller Notes “New item as seen in the images. No additional items are included in the sale. 30-day warranty ... Read moreabout the seller notes Brand Pepperl+Fuchs Model 210554, V1-G-30M-PUR MPN V1-G-30M-PUR, 210554 Cable Length 30m Device Connection M12 Female 4-Pin A-Coded To Leads Country of Origin Germany

Read more less

Key Benefits at a Glance Use in harsh environments High shock resistance Extended temperature range-40 ... +85 °C Extended operating voltage range Extremely high switching frequency

Read more less

Key Benefits at a Glance 3 mm flush 2-wire DC

Read more less