| Sensing Method |
Through-beam (Emitter + Receiver) |
| Sensing Distance |
15 m |
| Standard Sensing Object |
Opaque: 12-mm dia. min. |
| Light Source |
Infrared LED (870 nm) |
| Power Supply Voltage |
12 to 24 VDC±10%, ripple (p-p): 10% max. |
| Output configuration |
PNP |
| Connection Method |
Pre-wired 2 M cable |
| Current Consumption |
35 mA max. (Emitter: 15 mA max., Receiver: 20 mA max.) |
| Control Output |
Load power supply voltage: 26.4 VDC max., Load current: 100 mA max. Residual voltage: Load current of less than 10 mA: 1 V max. Load current of 10 to 100 mA: 2 V max. |
| Operation Mode |
Light-ON/Dark-ON selectable |
| Response Time |
Operate or reset: 1 ms max. |
| Sensitivity Adjustment |
One-turn adjuster |
| Indicators |
Operation indicator (orange), Stability indicator (green), Through-beam Emitter has power indicator (orange) only. |
| Ambient Illumination |
Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. |
| Ambient Temperature Range |
Operating: −25 to 55°C, Some connector models: −40°C to 55°C, Storage: −40 to 70°C (with no icing or condensation) |
| Ambient Humidity Range |
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) |
| Insulation Resistance |
20 MΩ min. at 500 VDC |
| Dielectric Strength |
1,000 VAC, 50/60 Hz for 1 min |
| Vibration Resistance |
Destruction: 10 to 55 Hz, 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions |
| Shock Resistance |
Destruction: 500 m/s2 3 times each in X, Y, and Z directions |
| Protection Circuits |
Reversed power supply polarity protection, Output short-circuit protection, and Reversed output polarity protection |
| Degree of Protection |
IP67 (IEC), Oil resistant models: IP67 (IEC) (in-house standards: oilproof), excluding cables and connectors |
| Material |
PBT (polybutylene terephthalate), Modified polyarylate |
| Weight |
Approx. 120 g |
